30 Comments

  1. I Build It Scrap Bin
    May 19, 2020 @ 9:23 pm

    Really, I said it all in the video. Do something dangerous and I'll see you next week!

    Reply

  2. dadygee
    May 19, 2020 @ 9:23 pm

    I take risks all the time I step foot in my workshop… I always think; how can/will this machine f*ck me up? OK.. then I´ll proceed with what I planed to do.. If it wasnt for ppl like me we still would sit in trees, eating leafes and be afraid of the ground. Not starting the lathe with the chuck key still in it 🙂

    Reply

  3. JM SometimeWoodWorker
    May 19, 2020 @ 9:23 pm

    I disagree that the material is just plywood. Plywood has always been Veneer-cored. Anything else needs to be defined, 
    MDF core plywood, 
    particle core plywood, 
    veneer particle core plywood
    and whatever the core is, if it’s not a veneer core it’s not just plywood.

    Reply

  4. J F
    May 19, 2020 @ 9:23 pm

    On the advice not to be safe I am now driving without a seat belt. I have also taken up heavy drinking, smoking tobacco, and the odd recreational drug from time to time as well. I also decided to go out with young ladies, hanging out in bars and at parties, and my wife is not happy with any of these new changes I have made.

    Reply

  5. Captain Valentine
    May 19, 2020 @ 9:23 pm

    Except for wooden boats. In that case the swelling is what makes it water tight.

    Reply

  6. MrArcher0
    May 19, 2020 @ 9:23 pm

    This is video evidence that covid-19 is detrimental to your mental health weather you get it or not.

    Reply

  7. silly name
    May 19, 2020 @ 9:23 pm

    From Plyco Australia: "The basics you need to know about Plywood is that it’s a sheet material which is brought to life by combining layers of wood veneer, which are glued together." From me: You were using veneered particle board. Nuff said.

    Reply

  8. Suraj Grewal
    May 19, 2020 @ 9:23 pm

    Take a shower with hot water next to it daily for 5 years, and the wood will destroy itself

    Reply

  9. POOL8DUDE
    May 19, 2020 @ 9:23 pm

    Roll sleeve cuffs in toward your arms, a few times, and they stay up. Rock on and stay risky John!

    Reply

  10. Jake Qwaninne
    May 19, 2020 @ 9:23 pm

    jackie brown

    Reply

  11. Jake Qwaninne
    May 19, 2020 @ 9:23 pm

    ya google, stop putting youtube stars that i have never seen and don't want to see again tell me to stay home and be safe, first, i'm not an idiot, and when someone i don't know or like tells me something, i ignore it,!!!!!!!!!! so i agree, it's gettin on my last nerve

    Reply

  12. Frank Turner
    May 19, 2020 @ 9:23 pm

    That’s funny I did apoxy coat all the pieces to my vanity in my upstairs bathroom and it is fully water proof. Mainly did cause it’s my daughters bathroom and she is 8 and gets water everywhere somehow lol

    Reply

  13. Tim Pedzinski
    May 19, 2020 @ 9:23 pm

    The mothers womb is a very dangerous place for way to many unborn children every year but that's an eruption for a different video.

    Reply

  14. Roberto Alfonso
    May 19, 2020 @ 9:23 pm

    Isn't there MDF core too? I had some floating shelves made, had chosen MDF and they didn't have it, instead they offered particle core instead saying it was a better option because it was about 15-20% lighter.

    Reply

  15. BC ElginTex
    May 19, 2020 @ 9:23 pm

    LOL!!! I wonder how much your vanity/drawers project would cost if you built it using PVC 'lumber'. I had to trim a new 'shed' (it's actually my wife's clothing boutique, so it had to be pretty). Anyway, I figured that I would use that PVC trim so I wouldn't have to worry about rot and caulking very often. Found the stuff, saw the price then quickly went to the next aisle and picked up the cheap pine trim. I don't remember the price. It was so long ago. Not sure if the price has come down since.

    Reply

  16. silveravnt
    May 19, 2020 @ 9:23 pm

    I'd like to know more about the various plywood cores available. Also grades of the faces.
    I've used a lot of oak veneered veneer core from the big box. I've encountered the particle core and MDF core in repairs or demos.
    It seems to me that, out of the three, the veneer core would be the most resistant to water damage. Of course they will all suffer from prolonged exposure to water. I've seen a lot of particle board with no veneer that has been wet only a short time and it's swollen to almost twice it's size. I agree that a bathroom should not have leaks but in the real world they do get them and a homeowner might not notice for some time.
    Keep up the great work.

    Reply

  17. AlBarathur
    May 19, 2020 @ 9:23 pm

    They dont make mom's wombs as they used to, but your point is true.

    Reply

  18. stekiboy
    May 19, 2020 @ 9:23 pm

    One like isn't enough. I love your videos, thank you.

    Reply

  19. Yonatan24
    May 19, 2020 @ 9:23 pm

    But will toilet paper cut wood?

    Reply

  20. Wolf Gollnitz
    May 19, 2020 @ 9:23 pm

    2020, the year of living dangerously. John, have a safe week!

    Reply

  21. Awesome Arizona
    May 19, 2020 @ 9:23 pm

    Early Youtube… Mattias-John-Jay-April-Izzy. Some of you know.

    Reply

  22. Awesome Arizona
    May 19, 2020 @ 9:23 pm

    Rush-Van Halen.. similar taste in music…in 2011 I saw RUSH 5th row, center vip section what a rush (pun intended).in 1980's, I used to go to backyard parties with Van Halen playing, Pasadena Calif. Love your vids and rants John, always have.

    Reply

  23. My Next Project
    May 19, 2020 @ 9:23 pm

    Just curious, but I assume they making the bar clamps out of plywood wouldn’t work. I know you said you could use soft wood, but was just curious if plywood might work.

    I agree those long metal bar clamps are so expensive and the cheap ones suck. Pipe clamps is currently what I use the most of. Thanks for posting another great video.

    Reply

  24. Gianluca Moretti
    May 19, 2020 @ 9:23 pm

    I love you.

    Reply

  25. Kip does Stuff
    May 19, 2020 @ 9:23 pm

    This video needed a few 'F' words. But even then the nay sayers and cry babies would still complain. New rule, no complaining without a suitable fix that will pass John's scrutiny. (that means stfu)

    Reply

  26. Makin' Sawdust
    May 19, 2020 @ 9:23 pm

    You are still my hero John, right behind Mathias, but I digress. Thanks for mentioning the fact about PROPERLY FITTING JOINTS ….If your lumber is milled properly and accurately, there is no reason to clamp the piss out of it. Way too many people on YT use way too much clamping pressure and are actually teaching poor technique.

    Reply

  27. spectre9801
    May 19, 2020 @ 9:23 pm

    Another great video. A friend I used to do carpentry with would always get upset with people who acted like the "Safety Police". We would be working and someone would question if his methods were safe. He would always answer them, "You want to be safe? Go home and play Chess!".

    Reply

  28. Splestrie
    May 19, 2020 @ 9:23 pm

    0:24 Safety can turn into a neurotic preoccupation for a lot of people, but I count ten fingers and one table saw, so you must have found a happy medium.

    Reply

  29. Steve Combs
    May 19, 2020 @ 9:23 pm

    OMG I love it!

    Reply

  30. Chuck Holton
    May 19, 2020 @ 9:23 pm

    If you are not making proper fitting joints……use a pipe or a bong!

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *